：+86 021-31170068
： www.shqhvalve.com
：sales@shqhvalve.com
Thin Ceramic Discharge Liquid Valve
Product overview
Thin ceramic discharge liquid valve is suitable for high hardness particles such as (ash water) and other media, or soft particles but corrosive medium pipeline for opening and closing. The nominal pressure is 1.6Mpa, and the suitable temperature is less than or equal to 150 ℃. The sealing surface adopts hard sealing, and the parts contacting with the medium are made of structural ceramic materials, which have high chemical stability and hardness.
Product Features
1. It has high wear resistance, corrosion resistance, erosion resistance, good thermal insulation and small thermal expansion.
2. The valve has good wear resistance, good sealing performance, small start-up load, less ash and ash deposition.
3. The valve adopts high-grade ceramic seal with tough structure, high mechanical strength, good wear resistance and long service life. Compact structure, can be installed at any angle.
Execution Standard
Design spec：JB/T 8691
Face to Face：GB/T 12221-2005
Flange end：JB/T 79-2015
Test & check：JB/T 8691
Performance Parameter
Nominal diameter：DN50~600mm
Nominal Pressure：PN1.6MPa
Applicable media：Dry powder, dust, water, steam and other media
Applicable temperature：≤150℃
Main materials：WCB
